Truck and Trailer Equipment Articles

Kenworth T680, T880, T880S Available for Order with ISL G Near Zero Emissions Natural Gas Engine →

Kenworth's T680 on-highway flagship and T880 and T880S vocational leaders are now available for order with the Cummins Westport ISL G Near Zero NOx emissions natural gas engine. The 8.9-L Cummins Westport ISL G Near Zero is rated at 320 hp and 1,000 lb-ft of torque. Exhaust emissions of the ISL G NZ are 90 percent lower than the current Environmental Protection Agency (EPA) and California Air Resources Board (CARB) NOx limit of 0.2 g/bhp-hr, and also meet the 2017 EPA greenhouse gas (GHG) emission requirements, according to Cummins Westport. Click for more...

New Calculation Method for Stability of Hydraulic Trailer Transport Enhances Operational Safety →

Mammoet announced the introduction of dynamic stability, a method for calculating the dynamic stability of hydraulic trailers. This method provides clients with a detailed assessment of the safety level of their project before it commences. The assessment deals with more relevant parameters than customary in the industry up till now. It therefore allows hydraulic transport projects to be executed more safely, according to the company. Click for more...

Trail King Promotes Lee Anderson to Vice President of Human Resources, Safety and Environmental →

Trail King Industries Inc. has promoted Lee Anderson to vice president of human resources, safety and environmental of Trail King. In his new role, Anderson will be driving high level growth strategies focusing on headcount, retention and safety improvements. Anderson started with Trail King in June of 2012 and has had a major impact on improving the human resource, safety and environmental areas of Trail King in the last five years. Click for more...

Trail King Welcomes District Sales Manager →

Ryan Smith has recently joined the Trail King Sales department as a district sales manager. Within this role, he will support sales and dealer relationships in the Pacific Northwest territory. Smith comes to Trail King with years of experience in the agriculture and equipment industries. Most recently, he was at FWC Equipment, in Washington State. In his role, he supported and sold agriculture and industrial equipment to customers throughout the Pacific Northwest. Click for more...

Travis Body & Trailer Adds Florida Utility Trailers Inc. to North American Dealer Network →

Travis Body & Trailer, Houston, Texas, a manufacturer of aluminum end dump, bottom dump, transfer and specialty dump trailers and bodies, has added Florida Utility Trailers Inc. to its network in North America. Florida Utility Trailers Inc., Apopka, Fla., is a Travis Trailer dealer representing the full Travis Trailer product line. Florida Utility Trailers has been central and south Florida's complete semi-trailer dealership for 30 years. Click for more...

Isuzu Announces Production of 40,000th N-Series Gasoline Truck →

Isuzu Commercial Truck of America Inc. announced that the 40,000th gasoline-powered Isuzu N-Series truck has been produced at the Spartan Motors Inc. facility in Charlotte, Mich. The truck rolled off the line June 8, 2017. “From April 2015 to June 2016 — a span of 15 months — we went from 20,000 to 30,000 gas-powered Isuzu trucks produced in Charlotte,” said Shaun Skinner, president of Isuzu Commercial Truck of America. Click for more...

J&J Adds Stainless Steel Tanker to Product Line →

J&J Truck Bodies & Trailers, a manufacturer of dump bodies, trailers, and oil and gas equipment, announced the completion of a new stainless steel pressure vacuum tank (PVT). The 130 BBL tank (5,460 gal. capacity) was mounted on a Peterbilt chassis and will be used by an energy company to transport fresh water, treated water, and/or production water for the oil and gas industry. "The stainless steel configuration allows customers to choose an alloy that is corrosion resistant, stronger and one that provides a longer lasting alternative," said Jason Cornell, sales manager at J&J Truck Bodies & Trailers. Click for more...

Felling Trailers, Inc.'s Myhre & Wald Earn CWI Certifications →

In early April of this year, Ben Myhre, a Welding Trainer for Felling's Weld Training Center and Kyle Wald, the V.P. of Engineering for Felling Trailers, Inc., obtained their Certified Welding Inspector Certifications through the American Welding Society. Myhre will utilize his CWI certification to provide a higher level of training for his welding students he teaches at Felling's Weld Training Center. Click for more...

Tesla Semi Includes 'Autopilot' Technology →

American automaker Tesla, a leading force in electric mobility, has announced that it will be adding a truck to its range as the brand's next model. Not the standard American pickup truck either, but a fully-fledged prime mover. Company CEO Elon Musk revealed the product move via Twitter, and while the brand has previously stated that a truck was a part of its long-term plans, Musk's tweet reveals that the truck could be revealed much sooner than expected. Click for more...

Felling Trailers Inc. Adds Blackwood Decking to Its Offerings →

Felling Trailers Inc. is well known in the trailer industry for offering a multitude of options to ensure a trailer is built to meet and exceed a customer's needs. With this mindset, Felling recently added Blackwood Lumber, an innovative, safety-focused decking material to its trailer option offerings. Blackwood Lumber starts with treated Southern Yellow Pine; each board has 1/4" milled out of the topside. Click for more...

Company Offers Service Body Alternative: the Pickup Pack →

The pickup pack from Highway Products is a service body alternative for companies or blue collar workers needing organized storage and lockup security without the cost. This package solution comes standard in an aluminum body that can be easily installed on your pickup in a few hours, according to the company. The “service body” in a pickup pack includes two full-length lockable low-side boxes, a flat or dome center hatch and a diamond plate aluminum finish. Click for more...

Felling Trailers Inc. Earns ISO 9001 Certification for Quality Management →

Felling Trailers Inc. , a manufacturer of industrial and commercial trailers, has recently received ISO 9001:2015 Certification for its Quality Management System for its Sauk Centre, Minn., and Litchfield, Minn., operations. In addition to Felling Trailers, Inc.'s 40 plus years of exceeding customers' expectations, the company is now proud to add the ISO 9001:2015 Certification to its credentials. Click for more...

Rapp Joins the Felling Trailers, Inc. Team →

Felling Trailers Inc., an industrial and commercial trailer manufacturer has announced that Mark Rapp recently joined its organization. Mark Rapp now serves as a Product Manager for Felling Trailers' Utility and Telecom Products. Mark comes to the company with more than a decade of sales and support experience dealing with investor-owned utilities, public utilities, cooperatives, contractors, government agencies and more. Click for more...

Buyers Products Introduces Slide Out Truck Bed Box Line →

Buyers Products, an industry leader in work truck accessories and snow and ice management equipment, introduces the new slide out truck bed box line specifically engineered for truck beds. The new slide out truck bed boxes boast a reinforced box design that fits comfortably in truck beds for easy access to tools. With a smooth aluminum construction and a rain-gutter design, these toolboxes provide year-round durability and protection. Click for more...

Discarded Tires: Beyond Ugly, They Are a Health Hazard →

The incentive to eliminate tire scrap gained new momentum after the emergence of the Zika virus threat. Click for more...

Bri-Mar Offers New 16-Inch Deck Length →

Bri-Mar is offering new 16 ft. deck length equipment trailers for 2017. Its EH18-10ELE and EH818-10LE are designed to be the right trailer, at the right price, according to the manufacturer. This 10K low pro is perfect for zero turn mowers, golf carts, compact tractors and similar equipment. Both models are now available in 16 in. deck lengths. Click for more...

Mack Extends 6x2 Liftable Pusher Axle Benefits with Addition of Automatic Standby Option →

Mack Trucks announced Automatic Standby Mode, a pioneering option for its 6x2 liftable pusher axle available on Mack Pinnacle highway models. Mack made the announcement during the 2017 Mid-America Trucking Show in Louisville, Ky. The 6x2 with liftable pusher axle offers improved fuel efficiency and productivity benefits and is designed for applications that haul out heavy and return empty, such as bulk haul. Click for more...

XL Specialized Trailers Introduces a Prototype at ConExpo-Con/AGG with New XL V →

XL Specialized Trailers displayed their new prototype Bottom Dump design at ConExpo-Con/AGG 2017. The 25 cubic yard or 60,000 pound capacity trailer has a base weight 1,000 pounds lighter than the standard model, giving the user more payload capacity. The steel design of the XL Bottom Dump is durable, using reinforced sidewalls made from 1/8-inch Hardox steel and gates made from 3/16-inch Hardox steel. Click for more...

Crysteel Showcases Paradox and Raptor Dump Body Lines and Roller Combo Hoist at the Work Truck Show →

Crysteel Manufacturing, one of the world's leading dump body and hoist manufacturers, showcased its Paradox and Raptor Class 8 dump bodies and Roller Combo 650 hoist at the Work Truck Show, March 14–17. “Crysteel is focused on providing cutting-edge products and services to the Class 8 market that improve our customers' operations,” said Stephen Hueser, general manager, Crysteel Manufacturing. Click for more...

XL Specialized Trailers Introduces Power Tail Trailer →

Ideal for transporting medium-duty construction equipment, the trailer features a hydraulic fold-under flip tail ramp for quick loading and unloading of hard-to-load equipment. Click for more...

← 101 Page 102 103 →