Landoll Introduces 835D Construction Trailer

Fri January 04, 2013
Truck and Trailer Guide

Landoll Corporation’s model 835D Construction is a 35-ton (32 t) capacity hydraulic detachable non- ground bearing trailer. This two-axle trailer has a frame rating with 12 ft. (3.6 m) and is equipped with flip third axle brackets and air connections as standard equipment. Landoll has maximized the lower deck lengths that are available up to 32 ft. (9.7 m). The load deck has been lowered down to a loaded deck height of 18.5 in. (47 cm) from the ground with a 6.5 in. (16.5 cm) clearance.

The gooseneck has seven ride height positions to choose from. The operator can lower the deck to within a few inches of the ground or fully operate the trailer with 18 in. (45.7 cm) of ground clearance at the gooseneck. Landoll’s detachable line also features a manual ride height control handle for the air suspension as standard.

Other standard items include 12 in. (30.5 cm) swing out extensions, 22 heavy angled “D” ring tiedowns, Apitong wood deck and recessed boom tough with a “V” bumper. The trailer also comes standard with 255/70R 22.5 tires, 25,000 lbs. air ride axles, and 4S2M ABS brakes.

The 835D can be equipped with the optional 31 in. (79 cm) fold-over front ramps to give an 11-1/2 degree load angle. When loading low clearance equipment choose the 60 in. (152 cm) ramps that give a 5 degree load angle for equipment like asphalt pavers. Other options include a strobe light package, Air Weigh on-board scales, and a self-contained hydraulic engine package.

The Model 835D features Landoll standard equipment including powder coat paint finish, centralized grease system, Grote wiring harness and LED lights. This also includes Landoll’s five year limited warranty package

Landoll Corporation is a manufacturer of equipment transport trailers from 5 to 60 ton (4.5 to 54 t) capacity.

For more information, call 800/428-5655 or visit www.landoll.com.