New Cross/Over Dump Trailer Available at Felling Trailers

Thu June 28, 2012
Truck and Trailer Guide

Felling Trailers added to its product line with the X55 cross/over dump trailer. Primary applications for Felling's X55 cross/over include hauling materials such as rip rap, clay, demolition and a multitude of other materials that current bottom dumps cannot haul.

Felling's X55 maintains 70 percent of weight over the chassis. This product design greatly minimizes rollover issues currently experienced in the side dump and end dump industry, according to the manufacturer.

The X55 also has the ability to dump "on the move." It does not have to stop like other side dumps or end dumps on the market today, and it has the ability to dump at a higher speed than current bottom dumps. Because of the weight distribution, the operator does not see or feel movement in the tractor while the X55 is dumping, either on the move or while stationary. Additionally, because of the weight distribution, the operator does not see torque in the king pin.

The X55 has the ability to dump at 55 degrees and is capable of dumping product that could possibly stick in other trailers.

Standard Features:

• Frame length: 43 ft. 9 in. (13.3 m)

• Tub length: 24 ft. (7.3 m) OD 21 ft. 8 in. (6.6 m) ID

• Width: 102 in. (259 cm)

• Height: 8 ft. 10 in. (2.7 m)

• Tub Capacity: 23.5 cu. yd. (18 cu m) — waterfall 28.5 cu. yd. (21.8 cu m) — full capacity

• Tub construction: 3/16 in. (.5 cm) AR-400 floor

• Frame construction: 80/100 KSI, fabricated steel I-beam

• King pin: 2 in. (5 cm) kingpin, 18 in. 46 cm) setting

• Landing gear: high clearance two speed, non-loan bearing 200

• Bumper: push bar type, bolt-on

• Cylinders: 3,000 psi, 5 in. (12.7 cm) Bore

• Suspension: Ridewell air ride

• Axles: (3) Meritor 25,000 lb. (11,340 kg) capacity

• Hubs: 10 hole, hub piloted

• ABS: 2S1M anti-lock brake system

• Drums: outboard mount, cast steel

• Wheels: (12) steel disc, 8.25 by 22.5

• Tires: (12) 11 R 24.5 G radial tires

• Brakes: 16 1/2 in. by 7 in. (42 by 17.7 cm)

• Fenders: poly fenders

• Lights: 12 Volt ICC w/ sealed harness

• Paint: entire trailer (top to bottom) undergoes steel shot blast, electrostatic application of two coats of primer and three coats of polyurethane paint

For more information, call 800/245.2809,or visit www.felling.com.